Category Archives: Glock

Glock 29,30,36 Sta-Tite Guide Rod

By | |
Leave a comment

The ONLY recoil assembly suitable for use in your carry pistol.

 

This assembly drops into both GEN 3 and GEN 4

G26 from retention

The rod is machined from 17-4 PH H1150 Stainless Steel.  The screw and spring cup are machined from 300 series Stainless Steel.

G30 close up

G30 close up

Glock spring cup 1

Glock spring cup 2

G30 spring cup

No messing around here.  No compromises.  This assembly won’t come apart, it won’t break during installation and with the black screw it will not be a source of reflection in a low light situation.

Using factory Glock springs you retain the function Glock intended.  The BT rod gives you the peace of mind to KNOW that your pistol will function 100% without any concern for breakage.

The new toolkit coming at the end of May will assemble/dis-assemble ALL Glock models and facilitates VERY quick and easy spring changes.

Purchase a G29,30,36 rod with new Glock springs installed for $54.00.  This is the best thing to put in your gun besides bullets.


Glock 29,30,36 Sta-Tite Guide rod w/ factory springs



Glock 26,27, 33 Sta-Tite Guide Rod

By | |
Leave a comment

The ONLY recoil assembly suitable for use in your carry pistol.

 

This assembly drops into both GEN 3 and GEN 4

G26 from retention

The rod is machined from 17-4 PH H1150 Stainless Steel.  The screw and spring cup are machined from 300 series Stainless Steel.

G26 shot 1

G26 shot 2

G26 close up

Glock spring cup 1

Glock spring cup 2

No messing around here.  No compromises.  This assembly won’t come apart, it won’t break during installation and with the black screw it will not be a source of reflection in a low light situation.

Using factory Glock springs you retain the function Glock intended.  The BT rod gives you the peace of mind to KNOW that your pistol will function 100% without any concern for breakage.

The new toolkit coming at the end of May will assemble/dis-assemble ALL Glock models and facilitates VERY quick and easy spring changes.

Purchase a G26,27,33 rod with new Glock springs installed for $54.00.  This is the best thing to put in your gun besides bullets.

Glock 26,27,33 Sta-Tite Guide rod w/ factory springs

G17, 22, 24, 31, 34, 35, 37

By | |
Leave a comment

B~T STA-TITE Guide Rod in the G17.

g17.1

The factory supplied plastic guide rods can and do chip. They can and do melt during repeated firing. The capturing button can and does pop out. Murphy’s law being what it is, one of these weaknesses may present itself at the worst possible time. Middle of a match? Middle of a defensive situation? Why take a chance? Replace it now with a part designed and proven to be 100% reliable!

Which spring? All B~T Sta-Tite Guide Rods are designed and intended to be used with the factory spring for ultimate reliability. Some shooters prefer heavier or lighter springs depending on their loads, recoil preferences or the addition of other accessories such as suppressors or compensators.

The factory spring, as well as the ISMI springs designed to be used in the G17 ,will work on a Sta-Tite rod.

 

This rod will drop in to GEN 1,2,3   G17, 22, 24, 31, 34, 35.

G17 Sta-Tite Rod

–

Glock: Sta-Tite Toolkit

G19, 23, 25, 32, 38 GEN 1,2,3

By | |
Leave a comment

B~T  STA-TITE Guide Rod in the G19.

g19.1

The factory supplied plastic guide rods can and do chip. They can and do melt during repeated firing. The capturing button can and does pop out. Murphy’s law being what it is, one of these weaknesses may present itself at the worst possible time. Middle of a match? Middle of a defensive situation? Why take a chance? Replace it now with a part designed and proven to be 100% reliable!

Which spring? All B~T Sta-Tite Guide Rods are designed and intended to be used with the factory spring for ultimate reliability. Some shooters prefer heavier or lighter springs depending on their loads, recoil preferences or the addition of other accessories such as suppressors or compensators.

The factory spring and the ISMI springs designed to be used in the G19 will work on a Sta-Tite rod.

 

Fits: GEN 1,2,3 G19,23,32,38.  Not for use in GEN 4.

G19 Sta-Tite Rod

–


Glock: Sta-Tite Toolkit



G20, 21, 21SF

By | |
Leave a comment

B~T STA-TITE Sta-Tite Guide  Rod for the G20, G21, G21SF.

G20 Sta-Tite

The factory supplied plastic guide rods can and do chip. They can and do melt during repeated firing. The capturing button can and does pop out. Murphy’s law being what it is, one of these weaknesses may present itself at the worst possible time. Middle of a match? Middle of a defensive situation? Why take a chance? Replace it now with a part designed and proven to be 100% reliable!

Which spring?  All B~T Sta-Tite Guide Rods are designed and intended to be used with the factory spring for ultimate reliability.  Some shooters prefer heavier or lighter springs depending on their loads, recoil preferences or the addition of other accessories such as suppressors or compensators.

Any 6mm I.D. spring designed to be used in the G20 will work on a Sta-Tite rod.

G20 Sta-Tite Rod

–

Glock: Sta-Tite Toolkit